[轉貼] 蔡司將大力發展 Sony NEX and Fuji X 自動對焦鏡？

MTB

New Family of Lenses for Mirrorless System Cameras
http://blogs.zeiss.com/photo/en/?p=2864 (全文)

小弟特別喜歡蔡司鏡，因此好期待能入返部平嘅full frame Canon DSLR，以致可以套到D蔡司鏡落部Canon body用，不過不得不承認，隨著年紀的增長，用手動鏡實在開始不及以前了，所以見到蔡司打算大力發展 Sony NEX 時，不禁心郁郁係咪要向NEX系統投資呢？不過有兩點我曾經都掙扎過。

1. full frame sensor 質素梗好過 APS-C
但我在想以現在根本都好少哂相來講，就算哂，會哂得幾大吖？通常就咁落個mon去睇，APS-C都夠哂用吧！

2. full frame DSLR 的觀景器梗好過 Sony NEX的電子觀景器
這點是肯定的，不過正如我所講，我自己用手動鏡實在開始不及以前了，相信事實是衹會越來越差，除非有AF 蔡司鏡俾Canon用，不然，相信甚至會平D的蔡司NEX版似乎也是個好選擇吧！

Why has Carl Zeiss waited so long to enter this market?
We have observed this market very carefully. Initially, many considered it a “cheap system camera segment” with slightly more sophistication than the market for compact cameras. That was not in line with our idea of quality. However, when growing numbers of camera manufacturers began to offer high quality cameras, Carl Zeiss’ interest in this market increased. Since the introduction of Sony’s NEX-7 and Fujifilm’s X-Pro 1, it became obvious that CSC cameras required quality lenses. So we decided that the time was ripe to bring such lenses to the market.

What focal lengths will be offered?
It will be a product family of its own. Three prime lenses are already in development: 2.8/12, 1.8/32 and 2.8/50 macro.

Will Carl Zeiss offer zoom lenses for that?
We’ll start the family with prime lenses. Zoom lenses are an option that is still being considered.

What type of bayonet (mounts) will be supported?
The new lenses will be available for Sony E-bayonet (Sony NEX cameras) and for Fujifilm X-bayonet (Fujifilm X cameras).

gmen75

1.8/32 too big and too long.  Why no one makes a fast 28mm for mirrorless?

gmen75

每支1000 歐元，全部無避震！

waiking

MTB 發表於 2012-9-18 22:47
New Family of Lenses for Mirrorless System Cameras
http://blogs.zeiss.com/photo/en/?p=2864 (全文)

價錢太貴啦

TLi

用過支 24mm 1.8 Nex 菜鏡，效果非常滿意，貴少少都值的。

kingkong_hk

e system有先天缺陷， 法蘭焦大短， sensor太大， 光線入射角度細引致邊緣成像差， 如果覺得菜頭e mount鏡正， 可試下加接環插c/n平鏡， 法蘭焦增大， 邊緣位正好多， 同菜頭分別不大

留意下18-200同10-18,鏡尾都加左距離， 改善法蘭焦太短， 不過支鏡會大碌左

gmen75

小弟特別喜歡蔡司鏡，因此好期待能入返部平嘅full frame Canon DSLR，以致可以套到D蔡司鏡落部Canon body用，不過不得不承認，隨著年紀的增長，用手動鏡實在開始不及以前了，

用個有chip既轉接環落Canon機﹐咪有對焦輔助兼測光囉。
http://www.pebbleplace.com/Personal/Contax_db_Adapters_1.html

MTB

gmen75 發表於 2012-9-19 04:24
1.8/32 too big and too long.  Why no one makes a fast 28mm for mirrorless?

大光圈50mm始終係經典！

MTB

gmen75 發表於 2012-9-19 04:46
每支1000 歐元，全部無避震！

真係好鬼貴！

MTB

gmen75 發表於 2012-9-19 10:08
用個有chip既轉接環落Canon機﹐咪有對焦輔助兼測光囉。
http://www.pebbleplace.com/Personal/Contax_db_ ...

多謝資料，我都有咁諗過！

gmen75

MTB 發表於 2012-9-19 22:43
大光圈50mm始終係經典！

50mm （相等）,  f/1.8 唔算大光圈播。

MTB

gmen75 發表於 2012-9-19 22:59
50mm （相等）,  f/1.8 唔算大光圈播。

f/1.8 可以啦，咁 1.4, 1.2, 1.0, 0.95 就梗係好啦，不過祇怕太貴(對我)！

gmen75

MTB 發表於 2012-9-20 12:26
f/1.8 可以啦，咁 1.4, 1.2, 1.0, 0.95 就梗係好啦，不過祇怕太貴(對我)！

日本製造，又無防震，唔抵玩。

而家支NEX 1.8/24，造工比C/Y Zeiss 鏡頭都相差好遠。

MTB

gmen75 發表於 2012-9-20 12:43
日本製造，又無防震，唔抵玩。

而家支NEX 1.8/24，造工比C/Y Zeiss 鏡頭都相差好遠。

完全同意，所以花太多錢去買就唔想了！