SHOW下大家有咩槍

lawson.

lionken07 發表於 2013-3-7 10:27
Winter piece.  My first gun.  She is awesome and went thru about 4,000 with her...

hi bro lionken07
thank you for your sharing
you are invited to join the discussion here as many bros are professional
if compare with them, it seems that i am just a kindergarten kit

lionken07

Ruger 10/22 "fun" gun.  Added some aftermarket goodies :)

Gino17

lionken07 發表於 2013-3-7 10:23
I'll play...

Nice Nikkor lens at the background~~

Kick Off

SV 6"


Marui hi-cap 4.3


Marui hi-cap 5.1 match customs


Glock 19


HK USP


HK 416D

lawson.

Kick Off 發表於 2013-3-15 15:51
SV 6"

估唔到你都有咁多好野喎

Kai_ass

My airsoft Colt CAR-15
A Vietnam War classic

Gino17

lionken07 發表於 2013-3-7 10:40
Ruger 10/22 "fun" gun.  Added some aftermarket goodies :)

Nice Ruger 10/22, there are tons of lovely aftermarket accessories for this lovely .22LR rifle~~

Gino17

Kai_ass 發表於 2013-3-6 23:30
My airsoft CZ75

My personal opinion you should keep this grip, it looks the best with the 2nd version CZ75.

Frankly speaking quality of CZ pistols keep dropping, my friends CZ75/85 were supplied with awful looking checker grip only, those guns were made with poor craftsmanship....... some CZ pistols in recent years were even shipped with ugly philips head grip screw.......

PS. see photo of one of my friend's CZ85.

Gino17

OK, this is a very old photo, my Springfield Armoury stainless steel M1911A1 in .45 CAP.
Picture was took shortly after I bought it, you can see it has only very few modification at that time:
1) Ed Brown extended thumb safety
2) Ed Brown extended magazine release
3) Ed Brown mag well
4) Full length guild rod, should be a Harrts recoil reducer (factory was went out of business years ago)
5) Wolff 16.5 lb recoil spring
6) Ed Brown beavertail grip safety
7) CMC (?) tatinium trigger
8) Wilson Combat wooden grip with grip screws

As you can tell from the picture, this pistol was supplier with that POOR quality Italian made rear sight, it was replaced with a Novak rear sight later.
PS. see those old fashion Ernie Hill leather holster and mag pouch........

Kai_ass

Gino17 發表於 2013-3-18 16:44
My personal opinion you should keep this grip, it looks the best with the 2nd version CZ75.

Frank ...

how abt the Tanfoglio ones
I got one Eric Grauffel Custom airsoft race gun
haha

0001

WA!!!!WTF!!!
我岩岩差D又想POST D新汽槍
先醒起我出左個槍POST...

咁耐無入黎...成21頁咁多啦~~~

0001

lawson. 發表於 2012-8-22 11:05
改得最核突係枝aug

但係我又最常用果支~~~~

lawson.

0001 發表於 2013-3-19 08:45
WA!!!!WTF!!!
我岩岩差D又想POST D新汽槍
先醒起我出左個槍POST...

如果你有時間
我會建議你由頭睇返哂
你會覺得自己好渺小
亦會學到好多野

Gino17

lawson. 發表於 2013-3-19 10:29
如果你有時間
我會建議你由頭睇返哂
你會覺得自己好渺小

我也是條極為渺小的米青蟲~~~

Gino17

0001 發表於 2013-3-19 08:45
WA!!!!WTF!!!
我岩岩差D又想POST D新汽槍
先醒起我出左個槍POST...

We should appreciate you for starting this post!!

Gino17

Kai_ass 發表於 2013-3-18 20:49
how abt the Tanfoglio ones
I got one Eric Grauffel Custom airsoft race gun
haha

槍械就正如美女一樣，每人喜好不同，只能話各花入各眼。
我心目中杯茶並不一定等於其他人兄嘅卡巴千奴嘅。

見師兄講開CZ/Tanfoglio手槍，小弟即管發表一下個人意見啦，不喜要插我都冇辦法。

就接觸過真槍多年以來嘅經驗所得，我認為CZ75/85根本上係設計上有先天不足，
無論係捷克原產，其餘好似瑞士參考CZ而造嘅AT-84, AT-88, Sphinx，
意大利TZ75, Tanfoglio嘅CZ copy系列，都有同樣共同點，
就係槍支上某幾件部件當射擊一段時間後就出現破裂情況，
若果話只屬某廠商產品，都可以話金屬加硬過程做得差，
但以我所見到係及全部不同國家生產嘅CZ copy產品都喺同一部件出問題，
呢方面就同支槍本身設計得差好有關係。

常見問題有:
1) slide stop會斷裂。
2) ambi-safety會斷裂。
以上兩個問題，如果有後備零件在手，更換都未算大工程，只不過第三樣常見問題就更嚴重同麻煩喇..........
3) 槍管下方由slide stop穿過個腰豆型孔洞前端爆裂開，需要更換一支新槍管，但麻煩在因該位置爆裂開變型，
導致想將支槍作正常分解開亦唔可以，須要攞返去槍店俾專業人士搞！

而且，香港嘅槍店規模，成支槍就話有現貨唧，槍管噃，慢慢等吓啦老細...........

我曾經同過好多槍友講過，我哋只係見到世界冠軍用乜嘢槍但就未考慮到人哋背後嘅事，梗係啦人哋打職業賽，
有槍械生產商同槍匠sponsor，比賽期間真係大吉利是支槍出固障或部件破爛，即時有新槍/零件更換，情況有如賽車場上。

我哋班業餘射手，邊到得到咁多支援噃，支槍有嘢爛咗呀，尤其是啲較冷門牌子嘅，聽住陳百強首“等”，慢慢等零件啦！Good Luck!!!

lawson.

Gino17 發表於 2013-3-19 15:30
槍械就正如美女一樣，每人喜好不同，只能話各花入各眼。
我心目中杯茶並不一定等於其他人兄嘅卡巴千奴嘅 ...

槍管部份裂開, 要換槍管
咁咪其實不單只煩
係安全上都有問題架喎

Gino17

lawson. 發表於 2013-3-19 16:11
槍管部份裂開, 要換槍管
咁咪其實不單只煩
係安全上都有問題架喎

唔好意思寫得唔清楚令人誤會咗。

Tanfoglio槍管爆裂嘅位置係喺圖片中個紅色圓圈圈住嘅一帶，並非槍膛！
不過都係恐怖啦，每次遇見上述情況發生時，個腰豆型圈爆裂開變咗型，
逼死支槍個slide唔能夠拉向後，唔能夠退彈或彈殼，又唔可以百分百肯定槍膛內嗰粒究竟仲係未發射嘅實彈，
抑或只係粒未退出嘅彈殼，咁樣攞支嘢返去槍店都咪話唔京吖！！

lawson.

Gino17 發表於 2013-3-19 17:40
唔好意思寫得唔清楚令人誤會咗。

Tanfoglio槍管爆裂嘅位置係喺圖片中個紅色圓圈圈住嘅一帶，並非槍膛！

唔能夠退彈或彈殼，又唔可以百分百肯定槍膛內嗰粒究竟仲係未發射嘅實彈，
抑或只係粒未退出嘅彈殼

咁就已經夠屎啦

Kai_ass

Gino17 發表於 2013-3-19 15:30
槍械就正如美女一樣，每人喜好不同，只能話各花入各眼。
我心目中杯茶並不一定等於其他人兄嘅卡巴千奴嘅 ...

haha
u miss one very important point, bro
Im only an airsoft player
Tanfoglio guns or CZ75 in airsoft are super fine, haha=]
but I understand ur concern
cheers=]